Part Name: Filler neck
Material: A356, A319, EN AC -Al Si7Mg, EN AC-Al Si10Mg, EN AC- AlSi5Cu,EN AC- AlSi9Cu, ZL101, ZL104
Weight: 2.00kg/pcs
Description:1. Filler neck is made by aluminum alloy permanent mold casting process, with 3Bar Air Pressure under Water, Precision Molds and Tooling, Suitable for gas equipments.
2. Full inspection on all dimensions, characteristics, and notes on drawing for each sample submitted.
3. Critical dimensions, Bracket locations, Cleanliness, Leak Test.
4. Process Flow Diagram, Design FMEA, Process FMEA, Control Plan, Material Specifications 5. Further machining work: turning, cutting, milling, grinding, drilling, reaming and threading
6. Surface finish process: Polishing and Vibratory Finishing

Part Name: Aluminum high pressure die casting
Material: A380, A390, AlSi9Cu3, EN AC-Al Si10Mg (Fe), EN AC-Al Si12 (Fe),
EN AC-AlSi12Cu1 (Fe), ADC10, ADC12
Weight: 1.00kg/pcs
Description: Aluminum high pressure die casting is suitable for medical equipments, dills, taps and shot blasting process, then powder coating.

Part Name: Fuel Nozzle body casting
Material: A356, A319, EN AC -Al Si7Mg, EN AC-Al Si10Mg, EN AC- AlSi5Cu,EN AC- AlSi9Cu, ZL101, ZL104
Weight: 1.50kg/pcs
Description: 1. Fuel nozzle body casting is made by aluminum alloy gravity die casting process, with 30psi Air Pressure under Water, Precision Molds and Tooling, Suitable for gas equipments.
2. Full inspection on all dimensions, characteristics, and notes on drawing for each sample submitted.
3. Critical dimensions, Bracket locations, Cleanliness, Leak Test.
4. Process Flow Diagram, Design FMEA, Process FMEA, Control Plan, Material Specifications 5. Calibration and R&R on measurement system for all checking aids for any critical dimensions or requirements.
6. Further machining work: turning, cutting, milling, grinding, drilling, reaming and threading
8. Surface finish process: polishing, shot blasting

Part Name: Aluminium chill casting
Material: A356, A319, EN AC-AlSi7Mg0.3, EN AC -AlSiMg0.6; EN AC-AlSi10Mg (a), EN AC- AlSi10Mg (Cu), EN AC-AlSi9Mg, EN AC-Al Si10Mg (Fe), EN AC- AlSi5Cu, EN AC-Al Si9Cu3 (Fe), EN AC-AlSi8Cu3, EN AC-AlSi7Cu2, ZL101, ZL104
Weight: 0.50kg/pcs
Description:1. Aluminum chill casting is made by Precision Molds and tooling, is suitable for connecter.
2. Full inspection on all dimensions, characteristics, and notes on drawing for each sample submitted.
3. Process Flow Diagram, Design FMEA, Process FMEA, Control Plan, Material Specifications 4. Further machining work: turning, cutting, milling, grinding, drilling, reaming and threading
5. Surface finish process: Polishing and Vibratory Finishing

Part Name: Diecasting part
Material: A380, A390, AlSi9Cu3, EN AC-Al Si10Mg (Fe), EN AC-Al Si12 (Fe),
EN AC-AlSi12Cu1 (Fe), ADC10, ADC12
Weight: 0.80kg/pcs
Description: Diecasting part is suitable for aluminium connecter, dills, polishing and vibratory finishing

Part Name: Casting foundry
Material: A356, A319, EN AC-AlSi7Mg0.3, EN AC -AlSiMg0.6; EN AC-AlSi10Mg (a), EN AC- AlSi10Mg (Cu), EN AC-AlSi9Mg, EN AC-Al Si10Mg (Fe), EN AC- AlSi5Cu, EN AC-Al Si9Cu3 (Fe), EN AC-AlSi8Cu3, EN AC-AlSi7Cu2, ZL101, ZL104
Weight: 0.20kg/pcs
Description:1. Casting foundry is made by Precision Molds and tooling, is suitable for connecter.
2. Full inspection on all dimensions, characteristics, and notes on drawing for each sample submitted.
3. Further machining work: turning, cutting, milling, grinding, drilling, reaming and threading
4. Surface finish process: Polishing and Vibratory Finishing

Part Name: Impeller
Material: A356, A319, EN AC -Al Si7Mg, EN AC-Al Si10Mg, EN AC- AlSi5Cu,EN AC- AlSi9Cu, ZL101, ZL104
Weight: 1.00—7.50kg/pcs
Description:Impeller is made by sand cast process, machining in CNC, be suitable for pump system.

Part Name: Aluminum Impeller
Material: A356, A319, EN AC -Al Si7Mg, EN AC-Al Si10Mg, EN AC- AlSi5Cu,EN AC- AlSi9Cu, ZL101, ZL104
Weight: 4.50kg/pcs
Description: Aluminum Impeller is made by gravity casting process, machining in CNC, is suitable for pump system.

Part Name: Pump body housing
Material: A356, A319, EN AC -Al Si7Mg, EN AC-Al Si10Mg, EN AC- AlSi5Cu,EN AC- AlSi9Cu, ZL101, ZL104, ZL107
Weight: 0.50kg/pcs
Description:Pump body housing is sand cast part, T6 heat treatment process, machining in CNC, Pressure test.

Part Name: Body casting
Material: A356, A319, EN AC -Al Si7Mg, EN AC-Al Si10Mg, EN AC- AlSi5Cu,EN AC- AlSi9Cu, ZL101, ZL104, ZL107
Weight: 7.50kg/pcs
Description:Body casting is suitable for blowers and exhausters – centrifugal as well as high speed turbo models, T6 heat treatment process, machining in CNC, Pressure test, make sure no leak.

Part Name: Water pumping body casting
Material: A356, A319, EN AC -Al Si7Mg, EN AC-Al Si10Mg, EN AC- AlSi5Cu,EN AC- AlSi9Cu, ZL101, ZL104, ZL107
Weight: 1.50kg/pcs
Description: Water pumping body casting is suitable for water transfer system, machining in CNC, Pressure test, make sure no priority, no leak.

Part Name: Impeller casting
Material: A356, A319, EN AC -Al Si7Mg, EN AC-Al Si10Mg, EN AC- AlSi5Cu,EN AC- AlSi9Cu, ZL101, ZL104, ZL107
Weight: 0.50kg/pcs
Description: Body casting is suitable for blowers and exhausters – centrifugal as well as high speed turbo models, made by aluminum gravity casting, T6 heat treatment process, machining in CNC, Pressure test, make sure no leak.

Part Name: Cast part
Material: A356, A319, EN AC -Al Si7Mg, EN AC-Al Si10Mg, EN AC- AlSi5Cu,EN AC- AlSi9Cu, ZL101, ZL104, ZL107
Weight: 7.50kg/pcs
Description: Cast part is suitable for blowers and exhausters – centrifugal as well as high speed turbo models, T6 heat treatment process, machining in CNC, Pressure test, make sure no leak.

Part Name: Oil pumping body housing
Material: A356, A319, EN AC -Al Si7Mg, EN AC-Al Si10Mg, EN AC- AlSi5Cu,EN AC- AlSi9Cu, ZL101, ZL104, ZL107
Weight: 2.00kg/pcs
Description: Oil pumping body casting with steel tube insert is gas station system, machining in CNC, Pressure test, make sure no priority, no leak.
1. Casting to be tested with 3.0BAR air pressure under water
2. Full inspection on all dimensions, characteristics, and notes on drawing for each sample submitted.
3. Critical dimensions, Bracket locations, Cleanliness, Leak Test
4. Process Flow Diagram, Design FMEA, Process FMEA, Control Plan, Material Specifications
5. Calibration and R&R on measurement system for all checking aids for any critical dimensions or requirements.
6. Can offer three types of molds die castings, sand and permanent mold casting
7. Software for drawing: pro/E, auto CAD, UG, CAD, PDF and solid works 2008 flow analysis
8. Further machining work: turning, cutting, milling, grinding, drilling, reaming and threading
9. Surface finish process: polishing shot blasting, chromate plating, power coated and anodizing
10. OEM and ODM parts range: auto parts, electronic parts, furniture parts, home appliance and other industrial uses
11. Processes: CAD service, metal processing, surface plating, QC testing and packing
12. Made according to customer's drawings, specifications and samples

Part Name: Casting Aluminum
Material: A356, A319, EN AC -Al Si7Mg, EN AC-Al Si10Mg, EN AC- AlSi5Cu,EN AC- AlSi9Cu, ZL101, ZL104, ZL107
Weight: 0.50kg/pcs
Description: Casting aluminum is suitable for blowers and exhausters, T6 heat treatment process, machining in CNC, make sure no leak.