Cast Aluminum Electrical Box

 Product Description

Scope of application of cast aluminum electrical box

1. Applicable to hazardous gas areas in Zone 1 and Zone 2;

2. Applicable to IIA, IIB, IIC class T1-T6 group gas or steam environment;

3. Suitable for indoor and outdoor (IP54, IP65 *)

4. Suitable for flammable dust places;

5. Applicable to dangerous environments such as oil mining, storage, chemical industry, medicine, textile, printing and dyeing, and military facilities;

6. Power distribution for lighting or power lines;

Technical characteristics 

1.Cast aluminum electrical box is made by permanent mold casting or gravity die casting, the surface is done powder coating,which appearance is beautiful;

2.Built-in components such as C65N, NC100H and S25S high breaking miniature circuit breaker, M611 or GV2 motor protector, 3VE1 air switch CM1 plastic case circuit breaker and signal lamp;

3.With overload and short circuit protection functions;

4.Module structure, various circuits can be freely assembled according to user needs;

5.Can be customized according to user requirements, such as the installation of surge protectors, ammeters, voltmeters, etc .;

6.Steel pipe cargo cable wiring; cast aluminum explosion-proof distribution box body

The cast aluminum electrical box can work reliably under the following conditions 

1.The upper limit value of ambient air temperature does not exceed + 40 °, and the average value within 24 hours does not exceed + 35 °, and the lower limit value is not less than -20 °;

2.The altitude of the installation site does not exceed 2000m;

3.Installation location * The average relative humidity of the wet month does not exceed 95%, and the average monthly temperature of the month is not less than + 25 ℃;

4.Pollution degree is 3;

5.Installation category is category Ⅱ, Ⅲ;

6.Protection level: IP54.

  
Dongrun is the professional manufacturer of Casting products which lies in Yongkang city,Zhejiang Province . Our factory was built in 1995, we have been in the casting industry more than 25 years. And we are experienced to deal with all different kinds of cast aluminum electrical boxes. We have our good team, our engineers can offer exact price list in 48 hours after we get your drawings or samples.
  
Just one point: We are only special in CASTING & MACHINING

In short: We are such kind one factory that supply casting products according to your samples or drawings
 

  Factory Cabability

  Production Images

  Company Equipment

From Casting to Machining, One-stop Solutions for your designs

  Packing & Shipping

Casting parts are very heavy, package must be strong. Our package material is wooden crate which is Fumigation free. 
And we can pack productions as customers' requirements

  Why Choose Us

    ❖     More than 25 years in castings and machining process; so we have much experience for your projects.
    ❖    Passed ISO9001 : 2015 & TS16949 : 2009
    ❖    Have four casting types in our factory; you can find the four process in one factory, save cost for your company
    ❖    From Casting to Finished surface, Owned casting, polishing and plating workshops, one-stop, We can offer Good quality and strict delivery time.
    ❖    With samples and order: We can offer dimension report, Chemical composition and Mechanical properties
    ❖    Control material with spectral and thermal analysis equipment (density and processing)
    ❖    Spectral analysis of raw material and liquid melt, batch before casting.  
    ❖    Transportation Advantage:
           A) Near Sea Port and Air Port-Ningbo Sea Port and Yiwu Airport or Hangzhou Airport; 
           B ) From Shanghai to our factory by Fast train directly, takes two and half hours; From Hangzhou to our factory, only takes one hour
  

  FAQ

Q1. Are you trading company or manufacturer 
 We are factory, We are only doing cast aluminum and machining more than 20years, we have much experience in this industry. If you find some "factory" can do kinds of material castings(steel, iron,stainless,cooper.......), we are sure they are trading company. If you have other material castings to do, we can introduce for you free. It is our pleasure that we can help you.

Q2. How to get quotation from your factory? 
 We need a 3D CAD solid model to prepare a First Quote interactive quote. All of the Firstcut processes are dependent on good 3D CAD solid models. Two-dimensional (2D) drawings are not adequate for quoting or making parts.

We can accept native SolidWorks (.sldprt) or ProE (.prt) files as well as solid 3D CAD models from other CAD systems output in IGES (.igs), STEP (.stp), ACIS (.sat) or Parasolid (.x_t or .x_b) format. 

Q3. When can I get the price? 
 We usually quote within 48 hours after we get your inquiry. If you are very urgent, please call us or tell us in your email so that we will regard your inquiry priority.

Q4. How about your lead time?
 1): Toolings &Samples 
 Sand Casting will take 15 to 30 days after receiving your advance payment. 
 Gravity casting, low pressure die casting, high pressure die casting will take 30 to 60days after receiving your advance payment. 
 2) Mass production 
 The specific delivery time depends on the items and the quantity of your order. 

Q5. Can you produce according to the samples?
 Yes, we can produce by your samples or technical drawings. We can build drawings for you after we get your samples too.

Q6. What is your sample policy?
 We can supply 1pcs sample free (value under USD15/PCS) after we finish as your drawings, but the customers have to pay the freight cost. If you need more samples, you have to pay the samples cost.

Q7. Can we use your current tooling? Or can we get samples which are shown on your website? 
  No, we can't do it.
 We only accept OEM orders and do casting parts as your drawings or samples. We can't sell any production or design to any third body. We can't show any photos on website without our clients' allowance. We signed NDA with all clients, all tooling and drawings belong our clients. We only use the tooling to make productions for one client. The client can take way the tooling any time after tooling cost.

Q8. Do you test all your goods before delivery?
 Yes, we have 100% test before delivery

Q9: How do you make our business long-term and good relationship? 
 We keep good quality and competitive price to ensure our customers benefit ; 
 We respect every customer as our friend and we sincerely do business and make friends with them, no matter where they come from.